Installation · Residential
Vaughan 4,200 sq ft new build
Full-home solid white oak, site-finished matte, seamless through all living levels.
What the job actually involved
Builder left carpet on stairs and a floating laminate on the main. We pulled both, flattened the subfloor, installed 7" white oak, and site-finished so the stair and the floor are the same formula. Move-in was a Thursday. We were off site Wednesday.
Specification
- 4,200 sq ft
- 7 in white oak
- Site-finished matte
- Matched stairs
What a job like this costs today
$67,711 – $96,055
4,200 sq ft in Vaughan, 2026 band, HST extra. 8–14 working days on site.
The job type behind this
Each entry carries the published 2026 band, the sequence, and the failure modes that produce a second invoice.
What goes wrong on a job like this
Floor and stairs finished in separate batches
Sheen and tone differ at the exact point where the eye compares them — the bottom step. It is the most visible mismatch in the house.
Avoided by: One mobilisation, one finish batch, floor and treads together.
Subfloor flatness accepted as-built
Hollow spots and squeaks across a floor that is otherwise correctly installed, and the mill will decline the warranty claim.
Avoided by: Measuring flatness and correcting it before the first board.
All 3 failure modes for whole-home install with the stairs in the same mobilisation
Taking this on in Vaughan
Free on-site measure for any qualified hardwood, stair, or railing job.
Vaughan is 22 km from the Sterling Road workshop, and 12 of the twelve job types in the catalogue are taken here. Whole-home site-finished white oak, box-stair conversions, iron balusters, 7"+ planks.
Want this specification in your house?
City, service and size gives you a 2026 GTA band in about twenty seconds. We lock a number only after a moisture reading on site.